 |
Two planes in one. Use it as a bullnose plane or remove the toe piece for chisel configuration by loosening the brass locking knob. |
| |
An adjustable set screw in the toe acts as a stop to accurately set the mouth opening. It also allows perfect repositioning of the toe when switching between configurations. |
| |
Stress-relieved ductile cast iron body and toe are accurately machined and ground so that the sole and sides are flat and square. |
| |
The adjustable toe allows the mouth to be narrowed for very fine shavings with minimum tear-out. |
|
Comfortable in the hand. |
|
A low bed angle of 15°, combined with the 25° blade bevel, results in a cutting angle of 40° for exceptional end-grain performance. |
|
Set screws along the side allow for accurate positioning of the blade as well as reinstallation without lateral adjustment. |
|
Blade is 1/8" thick, made of either A2 or O1 tool steel. It is lapped on the non-bevel side to a flatness tolerance of 0.0002" or better over the working surface, and with an average roughness surface finish of 5 microinches (0.000005") or better. |
|
Body is 4-3/4" long by 1" wide. |
|
Weighs just over 1-1/4 lb. |
|
Patented. |