Product Highlights:
 |
Combined blade advance and lateral adjust is sensitive and accurate. |
| |
Two blade guide screws prevent shifting of the blade. |
| |
The adjustable nosepiece does not extend beyond the body so that it can't be accidentally driven back into a sharp blade. |
| |
The wide wings, multiple finger grips and accurately machined 90° angle between the sole and the sides make this plane ideal for shooting. |
|
The 12° bed angle of the plane and the 25° bevel angle of the blade combine to result in an effective cutting angle of 37°. |
|
The plane is 6-3/8" long and 2" wide. |
|
Body is made of ductile cast iron. |
|
Blade is 1-5/8" wide, 1/8" thick, made of either A2 or O1 tool steel. It is lapped on the non-bevel side to a flatness tolerance of 0.0002" or better over the working surface, and with an average roughness surface finish of 5 microinches (0.000005") or better. |
|
Can be used with optional ball tail and front knob to convert the plane to a low-angle smoothing plane, albeit smaller. |
|
Optional toothed A2 steel blade with a 38° bevel is available for working with difficult grain. |
Accessories:
 |
|
|
 |
|
| Product # |
Description |
| 05P22.01 |
Veritas® Low-Angle Block Plane,A2 |
| 05P22.51 |
Veritas® Low-Angle Block Plane, O1 |
| |
|
| |
Accesories |
| 05P22.02 |
Repl. A2 Blade, 1-5/8", 25° bevel |
| 05P22.52 |
Repl. O1 Blade, 1-5/8", 25° bevel |
| 05P22.07 |
1-5/8" A2 Blade, 38° bevel |
| 05P22.57 |
1-5/8" O1 Blade, 38° bevel |
| 05P22.08 |
1-5/8" A2 Blade, 50° bevel |
| 05P22.58 |
1-5/8" O1 Blade, 50° bevel |
| A. 05P22.06 |
Optional Toothed A2 Blade, 1-5/8", 38° bevel |
| B. 05P22.04 |
Veritas® Tall Front Knob |
| C. 05P22.03 |
Veritas® Ball Tail |
| 05P22.05 |
Veritas® Ball Tail & Knob Set |
| D. 05P22.10 |
Veritas® Chamfer Guide | |
|
|
|
|
|
|
|
|
|
| |