Veritas Tools - Products Veritas Tools - Resources Veritas Tools - Dealers Veritas Tools - News
  You are here:   
New Products New Products
Carving Carving
Drilling Jigs Drilling Jigs
Marking Tools Marking Tools
Measuring Tools Measuring Tools
Bench Planes Bench Planes
Block Planes Block Planes
Specialty Planes Specialty Planes
Project Plans Project Plans
Router Tables Router Tables
Scraping Tools Scraping Tools
Sharpening Sharpening
Spokeshaves Spokeshaves
Vises and Clamping Vises and Clamping
Other Products Other Products
Grinder Accessories Grinder Accessories
Dowel, Plug, and Tenon Cutters Dowel, Plug, and Tenon Cutters
Workbench Accessories Workbench Accessories
Joinery Cutting Guides Joinery Cutting Guides
Mallets Mallets
Saws Saws
Power Tool Accessories Power Tool Accessories

Veritas® System 32 Cabinetmaking System
List Veritas dealers for items on this page
Product Highlights:
All holes are measured with consistent 32mm spacing and all in reference to panel sides and ends
Gauge head has both metric and Imperial graduations (recommend using metric for design and construction stage to reduce rounding errors)
Set drilling rails 37mm in from panel edge and clamp into place; system holes (vertical holes for screws, inserts, shelf supports or hinges) and construction holes (horizontal holes bored to accept dowels) can then be drilled
Bush carrier straddles rail, with selected size of drill bushing in hole in rail where first hole is to be drilled; holes then drilled as required for design
Dowelling jig bases allow for drilling dowel holes in ends of top and bottom panels
Two systems are offered – basic jig and deluxe system
Basic system includes one rail with fixing screws, two regular-length rods (for work up to 12" wide), two clamp heads and two tails, a bush carrier with 5, 8 and 10mm bushings, a 3/32" hex key and a register pin (see chart below for components that can be added to this system)
Deluxe system includes all items in basic system, plus two extra rails, two long rods (for work up to 24" wide), a gauge head, dowelling jig bases, connector rods and plate, an extra register pin, plus a fitted wooden box to store all parts (except rails and long rods)
Included detailed instruction booklet is also available separately
Made in Canada
Patented



Veritas® 32 Component and Compatibility Chart
Individual Components
- component is included    * - component is compatible
Veritas® 32
Deluxe
05J06.02
Veritas® 32
Basic
05J06.01

Dowelling
Jig
05J08.01

Shelf-
Drilling
Jig 05J03.03
A. 05J06.05       25" Rail with two brass fixing screws.
(3)
(1)
   
B. 05J06.06       Tapered Register Pin, ea.
(2)
(2)
C. 05J06.07       Pair Connector Rods & one Plate.
*
   
D. 05J06.14       Pair Dowelling Jig Bases.
05J06.13       208mm (8") Rail for dowelling (not shown).

*
*
*

*
E. 05J03.15       Pair Long Rods for work up to 24" wide.
05J03.30       Pair Extra-Long Rods for work up to 36" wide.

*
*
*
*
*
F.
05J06.10       Gauge head with Imperial & metric scales for setting rails.

*
*
*
G. 05J06.11       Fitted Wooden Box (won't hold rods).
*
H. 05J06.12       Bush Carrier and hex key.
J.

Individual Hardened Bushings (specify)

(The soft bushings can be drilled to any custom size.)

(4)

(5, 8, 10mm, 3/32")

*

(4)

(5, 8, 10mm, 3/32")

*

(3)

(1/4", 8mm, 3/8")

*

(11)

(all 12 less 10mm)

*

05J03.08   5mm          05J03.13   7.5mm          05J03.10   7/32"
05J03.09   6mm          05J03.18   8mm(5/16")   05J03.17   1/4"
05J03.11   6.75mm     05J03.21   9mm              05J03.19   3/8"
05J03.12   7mm          05J03.20   10mm           05J03.22 3/32" Soft



Product # Description
  05J06.01 Veritas® 32 Basic Cabinetmaking System
  05J06.02 Veritas® 32 Deluxe Cabinetmaking System
  05J06.00 Instruction Booklet
© Veritas Tools Inc. (4) | Privacy  | Site Map  | Contact Us  | About Us