Options:
Width
Variations:
- 05S2102 - Veritas PM-V11 Bench Chisel, 1/8"
- 05S2103 - Veritas PM-V11 Bench Chisel, 3/16"
- 05S2104 - Veritas PM-V11 Bench Chisel, 1/4"
- 05S2106 - Veritas PM-V11 Bench Chisel, 3/8"
- 05S2108 - Veritas PM-V11 Bench Chisel, 1/2"
- 05S2112 - Veritas PM-V11 Bench Chisel, 3/4"
- 05S2116 - Veritas PM-V11 Bench Chisel, 1"
- 05S2150 - Veritas PM-V11 Bench Chisels, set of 5 (1/4", 3/8", 1/2", 3/4", 1")
Veritas PM-V11 Bench Chisels
- The metal's micro-structure makes it extremely durable and wear-resistant, so it can withstand the impact of heavy chopping cuts even at bevel angles as low as 20°
- Edge will typically last at least twice as long in use as an A2 blade before it needs sharpening
- Despite its toughness, it is as easy to sharpen as A2 steel using common abrasive media such as water stones
- Tapered from shoulder to tip for strength and rigidity
- Center of gravity is at or below tang/socket connection; tang has flats to prevent handle from rotating
- Ferrule turned from a solid blank, seats directly onto blade shoulder
- Maple handle kiln-baked at high temperature to eliminate nearly all moisture content and to caramelize natural sugars in wood (helps seal it)
- Handle is contoured to fit hand, with shallow flats parallel to blade back to provide tactile cues for finger placement
- End is domed to resist chipping from glancing mallet blows
- Blades range from 3-5/8" to 5-1/8" long
- The3/8" and smaller chisels have 30° primary bevel angles, others are 25°
- All have 2° micro-bevels, require only final honing before use
- Made in Canada
Product # | Description |
05S21.02 | Veritas® PM-V11™ 1/8" Bench Chisel |
05S21.03 | Veritas® PM-V11™ 3/16" Bench Chisel |
05S21.04 | Veritas® PM-V11™ 1/4" Bench Chisel |
05S21.06 | Veritas® PM-V11™ 3/8" Bench Chisel |
05S21.08 | Veritas® PM-V11™ 1/2" Bench Chisel |
05S21.12 | Veritas® PM-V11™ 3/4" Bench Chisel |
05S21.16 | Veritas® PM-V11™ 1" Bench Chisel |
05S21.50 | Veritas® PM-V11™ Bench Chisel Set of 5 |